Aiphone AX-084C Quick Start Manual page 4

4) Time Out (continued)
Step 6: Set the Door Station
Monitor for the amount of time
that you want to be able to listen
in to a door station (10 to 600
seconds).
When a door station is
selected, the master will be in listen
mode for this length of time, then will
time out.
Step 7: Set the Door Station
Scan Monitor for the amount of
time that you want to listen to
each door station while in Scan
Monitor mode (5 to 60
seconds).
5) CO Transfer
Step 1: If using the CO
Transfer feature, click on the
Enable button. If not, skip to
section 6, Communication
Method.
Step 2: If Reverse Polarity
Detection is required for your
phone line, click on Detect.
This is sometimes required,
depending on the phone line.
Step 3: The Wait time for
Ring-Back-Tone can be
adjusted from 1-60 seconds.
6) Communication Method
Step 1: The Communication
Method can be switched from
"VOX or Press to Talk" to
"Press to Talk only". If "Press
to Talk" is selected, hands free
VOX feature will be disabled
on all master stations.
Page 4