Aiphone AX-084C Quick Start Manual page 3

3) Door Station (continued)
Step 5: Enable or disable each
station for being eligible for
scanning by selecting Enable or
Disable from the Scan Monitor
Tab.
Step 6: Select if you want the
door station's call tone to ring
on each master station by
selecting On or Off from the Call
Tone tab. Please note that
when set to "Off", the LED and
monitor will still come on at the
master when the door calls in.
Only the call tone will be muted.
4) Time-Out
Step 1: Set Call-in time for door
stations from 10 to 600 seconds,
or to infinite if the call is to ring
until it is answered.
(Set for both Normal and Priority Calls.)
Step 2: Set the duration of an All
Call announcement from 10 to
600 seconds.
(Set for both Normal and Priority Calls.)
Step 3: Set the CO Transfer
time from 10 to 300 seconds for
how long a CO transferred call
will ring the outside telephone
line.
Step 4: Set the Communication
time for the maximum amount of
time allowed for an intercom
conversation (30 to 600 seconds).
Set the CO Communication time
for the maximum amount of time
allowed for a CO transferred call
(30 to 600 seconds).
Step 5: Set the Door
Release Relay setting for
the duration of time that the
contacts are to be activated.
Page 3