Battery Charging And Operating Power - Motorola MC9500-K User Manual

Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
•
USB/Charge cable
• Provide the MC9500-K with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC9500-K and a host computer. With customized or third party
software, it can also synchronize the MC9500-K with corporate databases.
•
Charge Only cable
• Provide the MC9500-K with operating and charging power when used with the Motorola approved power
supply.
•
Single Bay Cradle/Charger Y Cable
• Provide the power to a Single Bay USB Cradle and Single Slot Battery Charger or two Single Slot Battery
Chargers off one power supply when used with the Motorola approved power supply.
•
Auto Charge cable.
• Provides the MC9500-K or Vehicle Battery Charger with operating and charging power tough a cigarette
lighter.

Battery Charging and Operating Power

The communication/charge cables can charge the MC9500-K battery and supply operating power.
To charge the MC9500-K battery:
Connect the cable power input connector to the Motorola approved power source.
1.
Align the cleat on the cable with the interface pocket on the back of the MC9500-K.
2.
The MC9500-K amber Battery Status LED indicates the MC9500-K battery charging status. The 4800 mAh
battery charges in less than six hours. See
When charging is complete, press the release button up and remove the cable from the MC9500-K.
3.
for charging status indications.
Table 1-1 on page 1-5
Accessories 8 - 15