Motorola MC9500-K User Manual page 96

7 - 8 MC55 User Guide
In the Network Connection list, select the connection type.
5.
Select the network connection that the device should use to connect to the Internet.
Tap Connect.
6.
On the computer or laptop, setup a Bluetooth PAN with your device.
7.
Select Start > Control Panel > Network Connections.
a.
Under Personal Area Network, select Bluetooth Network Connection.
b.
Right-click on Bluetooth Network Connection and select View Bluetooth network devices.
c.
In the Bluetooth Personal Area Network Devices window select your device.
d.
Click Connect. The computer connects to the device via Bluetooth.
e.
NOTE If your computer is Bluetooth-enabled and you select Bluetooth as the PC connection, you must initiate and
complete the Bluetooth PAN partnership before Internet Sharing will work. For more information, refer to
Windows Help and Support.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
8.
To end dial-up networking, on the MC95XX tap Disconnect.
9.
Hands-free Services
To connect to a Bluetooth headset:
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
NOTE
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC95XX speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.
Tap Start > Settings > Connections > Bluetooth icon.
3.
Tap New device. The MC95XX searches for Bluetooth devices in the area.
4.
Select the headset name and tap Next. The Passcode window appears.
5.
Enter the headset's passcode.
6.
Tap Next. The MC95XX connects to the headset. Refer to the headset user manual for instructions on
7.
communicating with a Bluetooth device.
NOTE During an active connection, the MC95XX cannot go into suspend mode when the Power Button is
pressed. A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.