Pocket Beep Operation - Icom IC-T3H Instruction Manuals

Pocket beep operation

This function uses subaudible tones for calling and can be used as
a "common pager" to inform you that someone has called when you
were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Set the desired CTCSS tone frequency or DTCS code in the set
mode.
• See p. 35 for programming details.
e Push [1•
TONE
• Repeat several times until " " appears when CTCSS, or " " ap-
pears when DTCS is selected.
r Push [2•
.
P BEEP
activate the pocket beep function.
• " " appears.
t When a signal with the matched tone is re-
ceived, the transceiver emits beep tones
and flashes " ."
• Beep tones sound for 30 sec. and
flashes. To stop the beeps manually,
push any key. " " continues flashing until
step y is operated.
y Push [PTT] to answer.
" "
• disappears and cancels the pocket beep function automatically.
] after [A• ] is pushed.
FUNC
] after [A•
FUNC
SUBAUDIBLE TONES
] is pushed to
" "
D
F
D TX
MR
" " appears
F
D TX
MR
9
36