Display Console - Precor LOW-IMPACT TREADMILLS 9.33 Owner's Manual

Display Console

Center display: Initially shows the banner. It changes
to the program profile when you select a program or
press QUICKSTART. A blinking column in the profile
indicates your position.
PROGRAMS keypad: To begin an
exercise session, press a PROGRAMS
key to view a menu of programs within
each category. For program
descriptions, refer to Programs.
User 1—2: Two USER keys are
available on the 9.33 treadmill. Press a
USER key at the banner to personalize
your exercise experience. The
information is stored for future
exercise sessions.
Selection key: Press the key to move
through the information in the column, so
you can choose what you want to display
during your session. Indicator lights
appear next to the item that is displayed.
INCLINE arrow keys: Use the
arrow keys to adjust the incline.
QUICKSTART: Press QUICKSTART to
begin your workout immediately.
Red STOP button: Press to pause or end a workout
and stop the running belt.
Owner's Manual: Display Console
HEART RATE display: The
HEART RATE display shows
your pulse.
MANUAL
TIME ELAPSED
TIME REMAINING
CALORIES
QUICK
START
SmartRate display: LEDs light in this
column when the SmartRate feature is
activated. Follow the LEDs to monitor your
heart rate and maintain it in your target zone.
Number keys: During an exercise
session, use the number keys to answer
prompts and update information.
SmartRate
OK and Navigational arrow keys: Use the
OK key to confirm responses to specific
prompts. The up and down arrow keys
present the available selection and affect
Copyright 2006 Precor Incorporated en
what appears on the display.
DISTANCE
PACE
Lower display: While you exercise, four
AVERAGE SPEED
sets of numbers show information about
your session.
PAUSE/RESET key: Press it once to enter
pause mode. Press it again to display a
workout summary. Press it once more to end
your exercise session.
SPEED arrow keys: Use the arrow keys to
adjust the speed.
17