Vlan Port Protocol Configuration Parameters - Nortel BSG8ew 1.0 Configuration Manual

Variable definitions
The following table describes the variables and values for configuring the VLAN protocol group
settings.
Variable
Frame Type
Protocol Value
Group Identifier

VLAN port protocol configuration parameters

The following section describes the parameters for configuration of the VLAN port protocol
located at Configuration,
Variable definitions
The following table describes the variables and values for configuring port VLAN port protocol
settings.
Variable
Port
Group ID
VLAN ID
Value
Frame Type refers to the encapsulation format.
Select the frame type for the protocol group. Select one of the following
options:
• Ethernet
• RFC 1042
• SNAP 802.1H
• SNAP Other
• LLV Other
The default value is Ethernet.
Specifies the protocol value.
Select one of the following options:
• ARP
• IP
• RARP
• IPX
• NOVELL
• NETBIOS
• APPLETALK
• OTHER
The default value is ARP.
If you select OTHER, enter the protocol value.
Type the group identifier for the frame type and protocol value
combination.
VLAN setup, Port Protocol tab
Value
Select the port to set port and protocol-based VLAN classification.
Select the group ID of the group of protocols from the Protocol Group
Database.
Select the VLAN ID associated with the group of protocols for each group.
VLAN advanced configuration
.
Configuration Guide
115