Route Guidance After Vehicle Transport; Determination Of Location After Vehicle Transport - Mercedes-Benz COMAND Operator's Manual

Navigation*
Important notes
Route guidance after vehicle
transport
!
GPS (Global Positioning System) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur
if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels
if road conditions are bad
depending on the vehicle's condi-
tion
If the reception of the GPS signal is un-
available, you will have to manually en-
ter the current vehicle position
( page 96).
96
If your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position. Mov-
ing the vehicle a few yards is typically
enough to remedy the situation.
Travelling abroad
The navigation DVD covers the continental
U.S., Hawaii and Canada.
Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
Change the navigation DVD
( page 95).
Determination of location after
vehicle transport
The system may require some time to find
its exact location after the vehicle was
transported by a car, train or ferry. To rem-
edy the situation, proceed as follows:
i
The navigation DVD must be loaded in
the navigation computer ( page 95).
Switch COMAND ON.
Call up the Navigation main menu
( page 98).
Resume driving and press %.
The display changes to map display.
Continue driving until the displayed po-
sition or the displayed road corre-
sponds to the present location. The
system now is correctly repositioned.