Displaying The Route On The Map - Mercedes-Benz COMAND Operator's Manual

Navigation*
During route guidance
1 Estimated time of arrival
2 Remaining driving time in hours and
minutes
3 Remaining journey (distance)
Points 1, 2 and 3 refer to the stop-
over destination. You'll only see the de-
tails for the final destination when you
arrive at your stopover and the system
has calculated the route to the main
destination.
122
i
The estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly
( page 148).
Selectable soft keys:
Route soft key:
Allows access to the display of the
route on the map ( page 122).
Mode soft key:
Allows access to the setting of the
route mode ( page 99).

Displaying the route on the map

In the Info menu ( page 121), press
the Route soft key.
The map appears. The route remaining
is highlighted in blue color.
The destination is marked with a flag
, any stop-over destination is marked
s
with a flag . The current vehicle posi-
tion is identified with the symbol.
Depending on the distance to the des-
tination, it may take some time before
the route display appears.