Mercedes-Benz COMAND Operator's Manual page 120

Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

If available, the street following the driving
maneuver with its name is shown in the top
status bar (here CHESTNUT RIDGE RD).
The destination is marked with a flag
the map, any stop-over destination is
s
marked with a flag
.
Changing map scale
The currently selected map scale is shown
in the left-hand corner of the bottom status
bar
.
i
The display unit can be changed to km
or miles using the control system (see
on
your vehicle Operator's Manual).
When the display unit is set to miles,
the COMAND will indicate distances in
miles (mi) or feet (ft).
When the display unit is set to km, the
COMAND will indicate distances in kilo-
meters (km) and meters (m).
Press any soft key.
The soft key displays appear.
i
If no soft key is selected within
approx. 8 seconds, the soft key display
will disappear.
Navigation*
Route guidance
Press the
or
soft key.
Depending on your selection, the map
will zoom in and display greater detail
or zoom out and show a wider area.
The map scale bar in the status bar will
show the map scale currently selected.
Map orientation
During route guidance, a symbol will ap-
pear on the left of the bottom status bar if
map display is switched ON.
North symbol
:
Fixed map orientation, north is always
pointing up,
or
Compass symbol
:
Dynamic map orientation, driving direc-
tion is always pointing up.
Map orientation can be selected
( page 129).
119

Advertisement

Table of Contents
loading

Table of Contents