Press the St-over soft key.
The menu for deleting or changing the
stop-over destination appears.
Use to select the
Delete active stopover entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination,
or
Use to select the
Replace active stopover entry.
Press .
The stop-over is deleted, a new stop-
over destination can be entered
( page 125).
Storing the current location
The system can store the current vehicle
location as a destination in the Last
destinations destination memory
( page 132).
The soft key displays are shown
( page 121).
Navigation*
During route guidance
Press the Memory soft key.
The current position is stored. The
Memory soft key display will change its
color for a short period of time.
i
Such destinations are marked in the
Last destinations memory with
( page 132).
If you wish to store a destination for lat-
er retrieval or repeat usage, you can
save the current destination in the des-
tination memory ( page 133).
Defining route guidance displays
The soft key displays are shown
( page 121).
Press the Display soft key.
The Display menu appears.
127