Selecting A Poi Using The Map - Mercedes-Benz COMAND Operator's Manual

Navigation*
POIs (Points of Interest)

Selecting a POI using the map

Press %
or
In the Enter Destination menu, press
the ( page 102) Map soft key.
The full-screen map appears. Symbols
indicate the current location and POIs.
i
The symbols to be displayed can be se-
lected ( page 128).
Symbols are indicated only if the map
scale is set to 0.05 mi (50 m), 0.1 mi
(100 m), 0.2 mi (200 m), or 0.5 mi
(500 m).
To set the map scale ( page 119).
If required, use , , , , +,
or ( to move the map.
If the soft key displays are hidden,
press any soft key.
The soft key displays appear.
140
.
Press the Symbol soft key.
A POI is selected and highlighted in col-
or. Its name appears in the status bar.
Press the Prev. or Next soft key to se-
lect the desired POI.
Press the Details soft key if required.
Details of the selected POI appear.
Press .
You are prompted to confirm the se-
lected POI as the destination.
Use  to select the menu item Yes.
Press .
The Start Route Guidance menu
( page 116) appears.