Mercedes-Benz COMAND Operator's Manual page 39

Audio
Radio operation
Use , ,  or  to choose a
preset and press .
or
Press one of the number keys
3 - ".
The system tunes to the station stored
under this number.
Tuning via scan search
Scan search is characterized as follows:
Scan search plays each receivable sta-
tion for approx. 8 seconds.
Scan search can be ended manually.
i
Scan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.
38
The scan search automatically stops at
the station listened to before the scan
search was started.
Starting scan search
Switch to the desired waveband
( page 35).
Press the Scan soft key.
Scanning begins.
Ending Scan search manually
Press the Scan soft key again.
Manual tuning
Switch to the desired waveband
( page 35).
Press - or , to scroll up or
down. Press and hold the button for at
least 2 seconds.
Manual tuning is activated.
Keep the button pressed or release it
and keep tapping it in quick succes-
sion.
The frequency will change by the tuning
increments for the respective wave-
band each time the button is pressed
or for as long as the button is pressed
and held.
Manual tuning is deactivated if the but-
ton is not pressed for approx. 3 sec-
onds.