Displaying the route list
In the Info menu ( page 121), press
the Route soft key.
The route appears on the map.
Press the List soft key.
The list of road/route sections remain-
ing appears.
The road currently travelled on appears
at the top.
Press or to scroll through the
list.
Press the Page soft keys to scroll
through the list page by page.
i
Depending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed. Dest.
is displayed before the last list entry.
Detour function
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route, if possible.
Navigation*
During route guidance
Activate function and setting length of
route segment to be blocked
The soft key displays are shown
( page 121).
Press the Detour soft key.
If the detour function has already been
activated, then you can change the
length of the route segment to be
blocked ( page 124) or switch off the
function ( page 124).
If the function has not been activated,
the system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
Continue to press the soft key More or
Less until the desired distance for the
route segment to be blocked is set.
123