Telephone Operation; Switching The Phone On/Off - Mercedes-Benz COMAND Operator's Manual

Telephone operation

Switching the phone ON/OFF

Switching ON
The telephone* is switched ON automati-
cally when COMAND is activated. The mo-
bile phone must be readily inserted into
the cradle*.
If COMAND is switched ON, the switched
OFF telephone* can also be switched ON
manually:
Press and hold for a few seconds
until the telephone* is switched ON.
The Telephone main menu appears
( page 77).
One of the following messages could also
appear:
Please insert phone
Insert the mobile phone into the
cradle*.
Phone not installed
Your vehicle is not configured for cellu-
lar telephone operation.
Please insert SIM card
This message appears only when using
a GSM cell phone.
Insert a SIM card ( Telephone Op-
eration Guide).
Telephone*
Telephone operation
Switching OFF
in the Telephone main menu
( page 77), press and hold
longer than 2 seconds.
or
Switch COMAND OFF ( page 28).
The telephone* switches OFF after a
one-minute delay. If a call is in progress
during this time, the telephone switch-
es OFF approx. one minute after the
call is terminated.
i
If a call is in progress (handsfree) you
cannot switch the COMAND OFF, . is
disabled.
for
73