Table of Contents
Advertisement
Safety Warnings
EATON Powerware
®
Energy Management System (EMS) Upgrade Kit User's Guide
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that you should follow during installation and
operation of the EMS−UGK. Please read all instructions before operating the equipment and
save this manual for future reference.
This EMS−UGK contains LETHAL VOLTAGES. All repairs and service should be performed
by AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE
PARTS inside the EMS−UGK.
S
To reduce the risk of fire or electric shock, install this EMS−UGK in a temperature and
humidity controlled, indoor environment, free of conductive contaminants. Ambient
temperature must not exceed 40°C (104°F). Do not operate near water or excessive
humidity (95% maximum).
S
Use the branch circuit breakers to disconnect hazardous voltage from the EMS−UGK. Turn
off the breaker before disconnecting the voltage measuring circuit cables, or hazardous
voltage may be present at the exposed end of the cable.
S
Installation or use of the equipment in a manner not specified by the manufacturer may
impair the protection provided by the equipment.
D A N G E R
C A U T I O N
S
164201724 Rev 1 www.powerware.com
INTRODUCTION
3
Advertisement
Table of Contents
