Manual Mode; Fan Speed Adjustment - FPI FireGenie Operating Instructions Manual

MANUAL MODE

Manual mode can be selected by pressing and releasing the AUTO/MAN button until the
symbol "MANUAL" is shown on the LCD.
In Manual mode, the Fan speed and Flame settings can be adjusted independently using
the Remote.

FAN Speed Adjustment

The FAN button is used to switch on and change the selected fan speed.
If the Fan is off, pressing and releasing the FAN button once will turn the fan on at Low
speed.
Pressing and releasing the FAN button again will change the speed to Medium.
Pressing and releasing the FAN button again will change the speed to High.
Pressing and releasing the FAN button again will switch the Fan OFF.
** Only on select models. Some models (GF Series) require the fan on at all times.
The display on the LCD will be as follows:
Fan on Low Speed Fan on Medium Fan on High Speed Fan = OFF
Speed
TM
FPI FireGenie Remote Control Manual Page 7