FPI FireGenie Operating Instructions Manual page 12

2) Programming the Off-Time of Time Zone 1
Press and release the PROG button again to program the Off-Time for Time Zone
1. Use the "+" and "-" buttons to adjust this time setting.
The LCD will show the following:
Programming the Set Temperature of Time Zone 1
3)
Press and release the PROG button again to program the Set Temperature. Use
the "+" and "-" buttons to adjust the temperature setting.
Page 12
Programming of Time Zone 1
Time Zone 1 Off-Time
Time Zone 1 Set Temperature
Programming of Time Zone 1
FPI FireGenie TM Remote Control Manual