Hitron HCB-F9 Instruction Manual page 57

1) SHARPNESS
The outline of the video image becomes cleaner and more distinctive as
the level of SHARPNESS increases. If the level goes up excessively,
however, it may affect the video image and generate noise.
- LEVEL
Adjust the SHARPNESS of the screen by using the LEFT or RIGHT
button.
0 ~ 31
- END
RETURN to SPECIAL MENU
2) MIRROR
ON: Sets a horizontal image inversion.
OFF: Cancels the inversion.
3) SYNC
Two SYNCHRONIZATION modes are available INTERNAL and
EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the video
signal between cameras without a synchronous generator. The line-lock
synchronization is only used in the areas of 50Hz(PAL Models).
- INT
This mode is necessary for using the internal synchronization.
- L/L
This mode is necessary for the operation of multi cameras because it
synchronizes the camera phase by using the external signal(AC Signal).
LEVEL
END
NOTE :
- When the power frequency is 60Hz, you can not use line-lock mode
- 'Sync' mode is fixed to 'INT' in DC 12V input power.
Sync phase is adjustable in line lock mode
0 ~ 359
RETURN to SPECIAL MENU
- 14 -