Hitron HCB-F9 Instruction Manual page 15

1) MODE
- AUTO
Auto control of the shutter speed can be achieved. When AUTO mode is
on, the speed is controlled automatically according to the brightness of
the screen.
BRIGHTNESS
END
- SHUTTER
The shutter speed can be controlled manually.
X128 ~ 1/120,000
- FLK
Please select 'FLK' mode when flickering occurs on the screen, due to
an imbalance between illumination and frequency.
PAL Model : 1/120
NOTE :
- When selecting DC/VIDEO lens, you can choose 'FLK' or '1/60 or 1/50'.
The 'FLK' functions FLICKLESS OFF and the '1/50' functions E/I OFF.
- While using the internal system, if the shutter setting is on 'AUTO' and
the camera is directly facing a bright fluorescent light, the image on the
screen can be adversely affected. Therefore please choose the
installation location with care.
- When 'SHUTTER' mode is on, the SENS UP function does not operate.
2) AGC (Auto Gain Control)
Adjust the AGC GAIN to the desired mode by using LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the
level of noise also increases.
- HIGH / MIDDLE / LOW / OFF
BRIGHTNESS
END
Adjust the "BRIGHTNESS" to the desired LEVEL
by using LEFT or RIGHT button.
RETURN to AE MENU
Adjust the "BRIGHTNESS" to the desired LEVEL
by using LEFT or RIGHT button.
1 ~ 70
RETURN to AE MENU
- 8 -