Programming Thermostat - Quadra-Fire MTVI-E2-MBK-C Manual

Programming Thermostat

Q. Programming Thermostat
The thermostat maintains a desired room temperature.
The 5-2 day programmable function allows one program
for week days and a separate program for Saturday/Sun-
day. (Up to 4 periods per day).
Thermostat Controls
Figure 13.1
Function buttons
Press to select the function
displayed just above each
button. (Functions change
depending on the task.)
Saturday and Sunday can be programmed individually
by changing the format from 5-2 to 5-1-1. To change
the format :
1. Press and hold the up button and the center button
until the display changes.
2. Press up or down to change system function num-
ber to 16.
3. Press NEXT to advance to next function.
4. Press up or down to change status number to 1.
5. Press DONE to exit and save settings.
November 28, 2017
Digital display
Hold Button
Press to override
programed tem-
perature control
Temperature buttons
Press up or down to set preferred
temperature.
www.quadrafi re.com
Program Schedule
Pre-set settings are shown below.
You can program 4 time periods each day, with different
settings for weekdays and weekends.
Wake- Set to time and tempera-
ture you want in the morning
until you leave for the day.
Leave- Set the time and tem-
perature you want the heat out-
put reduced to during the day.
Return- Set the time and tem-
perature to what you want the
heat output increased to in the
evening.
Sleep – Set the time and tem-
perature to what you want for
overnight.
To Adjust Program Schedules
1. Press SET CLOCK/DAY/SCHEDULE, then SET
SCHEDULE.
2. Press / to set your weekday wake time (Mon-
Fri), then press NEXT.
3. Press / to set the temperature for this
time period, then press NEXT.
4. Set time and temperature for the next time period
(Leave). Repeat steps 2 and 3 for each weekday
time period.
5. Press NEXT to set weekend time periods (Sat-
Sun), then press DONE to save & exit.
NOTE: You can press CANCEL PERIOD to eliminate
unwanted time periods (except Wake).
Program Schedule Override (temporary)
Press or to immediately adjust the temperature. This
will temporarily override the temperature setting for the
current time period.
The new temperature will be maintained only until the next
programmed time period begins. For example, if you want
to turn up the heat early in the morning, it will automatically
be lowered later, when you leave for the day.
To cancel the temporary setting at any time, press RUN
SCHEDULE.
Program Schedule Override (permanent)
Press HOLD to permanently adjust the temperature. This
will override the temperature settings for all time periods.
The "Hold" feature turns off the program schedule and al-
lows you to adjust the thermostat manually, as needed.
Whatever temperature you set will be maintained 24 hours
a day, until you manually change it, or press RUN SCHED-
ULE to cancel "Hold" and resume the prgrammed sched-
ule.
7082-151C
MT. VERNON E2 INSERT-C
Heat Heat
70° F
Wake
(6:00 am) (6:00 am)
62° F
Leave
(8:00 am) (8:00 am)
70° F
Return
(6:00 pm) (6:00 pm)
62°F
Sleep
(10:00 pm) (10:00 pm)
7014-262B January 29, 2016
Batte
NOT
and
erat
Pr
Inst
BAT
es a
Eve
plac
If ba
day
man
13