Post-Installation - Avaya P332GT-ML Installation And Configuration Manual

Chapter 5 Powering Up the Avaya P330
Warning: The proper wiring sequence is ground to ground, positive to positive and
negative to negative. Always connect the ground wire first and disconnect it last.

Post-Installation

The following indicate that you have performed the installation procedure
correctly:
Table 5.1
Procedure
Powering the P330
Creating Stacks
If you do not receive the appropriate indication, please refer to "Troubleshooting the
Installation".
26
Post-Installation Indications
Indication
All front panel LEDs illuminate
briefly
The LED next to the
appropriate connection ("Cable
to upper unit" or "Cable to
lower unit") is lit.
Troubleshooting
Information
Page 127
Page 127
Avaya P332GT-ML User's Guide