Skoda Rapid Owner's Manual page 70

Inserting
›
Grasp the variable loading floor at handle
›
Insert variable loading floor into the vehicle with the front portion tilted about
15 cm beneath the luggage compartment
B
›
Then follow the same steps as when setting the upper position
to upper position or the lower position
CAUTION
When removing or inserting the variable loading floor, the maximum distance of
■
15 cm » Fig. 72 under the luggage compartment cover must be adhered to -
B
there is a risk of damaging the boot flap seal.
When inserting the variable loading floor into the vehicle, the luggage compart-
■
ment cover must not be in the "parking position"
Note
After removing the variable cargo floor, place it down in such a way that it cannot
be damaged or soiled.
Fold up/fold down
Fig. 73 Fold up/fold down variable loading floor

First read and observe the introductory information and safety warn-
ings on page 66.
The variable loading floor can be folded up in both positions (upper and lower).
Folding up
›
Grasp the variable loading floor at handle
68
Using the system
» Fig. 72.
A
cover» .
» page 66, Set
» page 67, Adjust to the lower position .
» page 64.
» Fig. 73.
A
›
Lift the variable loading floor in the direction of arrow
edges lock in place in area
B
Folding down
›
Grasp the variable cargo floor in the middle or at handle
›
Unlock the variable loading floor by pulling it in direction of arrow
"Parking position"

Fig. 74 Set parking position / fold down from the parking position

First read and observe the introductory information and safety warn-
ings on page 66.
The variable loading floor can only be in set to the "parking position" when it is in
the lower position » page 67 and the luggage compartment cover has been taken
out » page 63.
Folding up
›
Remove the luggage compartment cover from the vehicle
›
Grasp the variable loading floor at handle
›
Lift the variable loading floor in the direction of arrow
edges lock in place in area
B
Folding down
›
Push the foldable corners
B
in the direction of arrow and remove these from positions
2
›
Grasp the variable cargo floor in the middle or at handle
›
Fold down the variable loading floor in the direction of arrow
until the foldable
1
.
C
.
A
» page
» Fig. 74.
A
until the foldable
1
.
C
» Fig. 74 on both sides of the variable loading floor
C
.
A
3
» Fig. 73.
2

63.
.
.
