Skoda Rapid Owner's Manual page 69

›
Place the variable loading floor in direction of arrow
CAUTION
When setting the variable loading floor to the upper position, the luggage com-
partment cover must not be in the "parking position"
Note
Under the variable loading floor in the upper position
space for storing items.
Adjust to the lower position
Fig. 70 Set the variable loading floor to the lower position
Fig. 71 Set variable loading floor to the lower position / variable loading
floor in the lower position

» Fig. 69 - .
4
The variable loading floor in the upper position can be set to the lower position as
follows.
» page 64.
›
›
›
» Fig. 69 -  there is a

›
›
When setting the variable loading floor to the lower position, the luggage com-
partment cover must not be in the "parking position"

Removing
›
›
›
First read and observe the introductory information and safety warn-
ings on page 66.
Grasp the variable loading floor at handle
Lift the variable loading floor in the direction of arrow
the direction of arrow until it detaches from brackets
2
Place the variable loading floor onto the floor covering of the luggage compart-
ment while tilted forward.
Push the variable loading floor in the direction of arrow
stop, and until its front part » Fig. 71
C
Place the variable loading floor in direction of arrow
CAUTION
Remove/Insert
First read and observe the introductory information and safety warn-
ings on page 66.
Grasp the variable loading floor at handle
Lift the variable loading floor in the direction of arrow
about 15 cm below the luggage compartment cover
B
Remove the variable loading floor from the vehicle by moving it in the direction
of arrow .
2
» Fig. 70.
A
and partially move in
1
.
B
all the way to the
3
is raised.
4 .
» page 64.
Fig. 72
Remove variable loading floor
» Fig. 72.
A
until its rear area is
1
» .
Seats and useful equipment


67