Table of Contents
Advertisement
Set your Printing Preferences
Strobe Settings
Strobe settings control the amount of energy used to print a pixel. Higher
settings use more energy. As the settings increase, the image becomes more
intense and the print-head life decreases. Rimage recommends using the the
lowest strobe setting that provides the desired image quality.
Notes:
•
These are recommended settings for Rimage brand media.
•
This may require multiple test printings on discs to fine-tune the color
hue. Set Enable Color Sub-Strobes to Enabled to lower an individual
color's print strobe. For example, this setting can be used to lower the
Yellow Print Strobe setting when trying to eliminate a halo effect on a
printed disc.
1. Select
2. Set the Master Print Strobe setting.
Note: Rimage recommends the following settings for Rimage-brand
media:
•
Media surface: Thermal-printable media
•
Print strobe setting for black ribbon: 325 - 400
•
Print strobe setting for red ribbon: 375 - 425
•
Print strobe setting for blue ribbon: 350 - 400
3. Select Enabled to Enable Color Sub-Strobes.
Important! Color Sub-Strobe settings are only available with CMY
ribbons.
4. Select OK to save the changes and close the Device Settings window.
2001809_A
SHORT TERM CONFIDENTIAL
For more information visit
rimage.com/support
14
Hide quick links:
Advertisement
Table of Contents
