Panasonic KX-NS8290 Installation Manual page 8

1.1 For Your Safety
•
Disconnect the Trunk Adaptor from the AC outlet and disconnect the LAN cable if the Trunk Adaptor emits
smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped and contact an authorised service centre.
•
Clean the AC plug periodically with a soft, dry cloth to remove dust and other debris.
•
If using an AC adaptor, use only the optional AC adaptor KX-A239AL (PQLV206AL), KX-A239BX
(PQLV206CE), KX-A239CE (PQLV206CE), KX-A239EJ (PQLV206E), KX-A239UK (PQLV206E),
KX-A239X (PQLV206), or KX-A420BR (PSLP1662). Since the AC adaptors that can be used vary
depending on the country/area, contact an authorised service centre for details.
•
If damage to the Trunk Adaptor exposes any internal parts, immediately disconnect the cable or cord. If
the power is supplied from the network to the Trunk Adaptor (Power-over-Ethernet), disconnect the
Ethernet cables. Otherwise, disconnect the AC adaptor cord. Then return the Trunk Adaptor to a service
centre.
•
The Trunk Adaptor should only be connected to a power supply of the type shown on the label on the Trunk
Adaptor.
•
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a fire.
•
When installing or testing a Trunk Adaptor with an external AC adaptor, the AC adaptor should be plugged
into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet,
as the weight of the adaptor may cause it to become disconnected.
•
The DC jack cover poses a choking hazard. Keep the DC jack cover out of reach of children.
•
When the Trunk Adaptor is no longer in use, make sure to detach it from the wall.
8 Installation Manual