Panasonic KX-NS8290 Installation Manual page 59

Category
Port Property - Virtual
SIP Gateway—Calling
Party
DDI/DID
PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Category
DIL Table & Port
Settings—DDI / DID /
TIE / MSN
Setting Item
SIP Account / User
Name—From
From Header - User Part
Setting Item
DDI/DID/TIE/MSN
Remove Digit
4.5 Programming for the KX-NS1000
Value Range
100–99999
User Name,
Authentication ID,
PBX-CLIP
Value Range
0–15
Setting Value
Set the SIP Account /
User Name start number
for the Trunk Adaptor
referring to the SIP
Authentication ID (SIP
Port Property) of the
Trunk Adaptor's first
port. The default start
number is 401.
Select PBX-CLIP.
Setting Value
Specify the number of
digits of the SIP
Authentication ID. For
example, if the SIP
Authentication ID is 401,
select 3.
Installation Manual 59