Category
IP-GW Card Property—
GK Settings
IP-GW Port Property
SIP Card Property
SIP Port Property
*1
For fax communications, it is necessary to specify G.711A or G.711Mu for Voice Codec Priority 1st.
When the Connection Attribute setting for an IP-GW or SIP-GW port is set to Trunk Adaptor, that port no longer requires an
*2
activation key. In that case, set Activation Key mode to No (default) on the Trunk Adaptor side.
Setting Item
T310
T313
T316
T318
T319
T322
T3D3
T3D9
No.
Destination Number (30
Digits)
Device Name
Port
Connection
Activation Key mode
SIP Location Hold Time
Max.
SIP Location Hold Time
Min.
SIP Location Hold Time
Interval
SIP Session Timer Min.
Port
Authentication ID
Authentication
Password
Connection
Current IP Address
Value Range
0–3000
0–600
0–3000
0–600
0–600
0–600
0–3000
0–3000
1–48
Max. 30 digits
Max. 20 characters
KX-NS8290X: 1–23
KX-NS8188X/
KX-NS8290CE: 1–30
INS, OUS, Fault
Yes, No
10–3600
10–3600
1–10 s
90–3600
KX-NS8290X: 1–23
KX-NS8188X/
KX-NS8290CE: 1–30
3–5 digits
Max. 32 characters
INS, OUS, Fault
1.0.0.0–
223.255.255.255
4.4.2 Setting List
Default Value
1000
60
0
0
0
40
50
200
–
Not stored
Not stored
–
–
No
60
50
1 s
90
–
KX-NS8290X: 401–423
KX-NS8188X/
KX-NS8290CE: 401–
430
Not stored
–
–
Installation Manual
51