Overview Of Web Maintenance Console - Panasonic KX-NS8290 Installation Manual

4.1 Overview of Web Maintenance Console

4.1 Overview of Web Maintenance Console
Web Maintenance Console of the Trunk Adaptor is designed to serve as an overall system programming
reference for the Trunk Adaptor. You can programme and control the Trunk Adaptor over an IP network using
Web Maintenance Console.
This section describes programming basic items using Web Maintenance Console.
The screen below shows the home screen of Web Maintenance Console for the Trunk Adaptor.
Note
•
The contents and design of the software are subject to change without notice.
•
It is also possible to access Web Maintenance Console for the Trunk Adaptor using the KX-NS1000
Web Maintenance Console. For details about the KX-NS1000 Web Maintenance Console, refer to
"Overview of Web Maintenance Console" in the Installation Manual of the KX-NS1000 PBX.
The settings on the screen are as follows:
Setting Item
SYSTEM
LINE
Adaptor Name
LINE Status
IP Address
MAC Address
34 Installation Manual
Description
Displays the status of the system.
Displays the status of the E1 line or PRI line.
Displays the name set in Easy Setup—Adaptor
Setting. You can change the name here, and then
click [OK], if required.
Displays error messages related to the line. (See
"5.2 Error Messages".)
Displays the Trunk Adaptor's IP address.
Displays the Trunk Adaptor's MAC address.
Value Range
INS (In Service)
OUS (Out of Service)
Fault
INS
OUS
Max. 32 characters
INS, Error message
1.0.0.0–223.255.255.255
00:00:00:00:00:00–
FF:FF:FF:FF:FF:FF