Park - Park (#); Park - Call Park To Other Extension (!); Pcall - Priority Call; Phyex - Dial Physical Extension By Number - Avaya IP Office 5420 + EU24 User Manual

Page 44 - Function Key Programming

Park - Park (#)

Park calls to and retrieve calls from a specific park slot.
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
phone by the user using an
calls into that park slot and unpark calls from that slot. Parked calls can also be
retrieved with the Ride function (see page 48).
When a call is parked in that park slot by the user, a
key and parked by another user, then Park is underlined.
[User | Digital Telephony | Park]
See also:
•
•
•

Park - Call Park to Other Extension (!)

Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function (see page 48).
This function can be programmed with or without a target extension number. This
function can be programmed through the phone by the user using an
If programmed with a number, the
a call, pressing
If programmed without a number, after pressing
must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, it's next 2901 if 2900 is
still parked and so on. If not retrieved elsewhere, a parked call will recall to the parking
extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
•
•
•

PCall - Priority Call

Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function requires the target extension number to be specified when programmed.
The target extension is then shown next to
programmed through the phone by the user.
[User | Digital Telephony | Advanced | Call | Priority Call]

PhyEx - Dial Physical Extension by Number

Dial a specified extension regardless of the current logged on user at that extension
and any forwarding, follow me and do not disturb settings applied by the extension
user.
This function requires the target extension number to be specified when programmed.
The target extension is then shown next to
programmed through the phone by the user.
This function is currently only available on US based systems.
[User | Digital Telephony | Dial | Dial Physical Extension by Number]
Page 44 - Function Keys
Function Key Programming
CPark - Call Park (!) on page 32.
Park - Call Park to Other Extension (!) on page 44.
Ride - Ride Call on page 48.
Park parks the call against that extension.
CPark - Call Park (!) on page 32.
Park - Call Park to Other Extension (!) on page 44.
Ride - Ride Call on page 48.
key. This function can be programmed through the
Admin 1 key. The user can use the
Park key displays that number. After answering
Park the target for the parked call
PCall. This function cannot be
PhyEx. This function cannot be
IP Office 5420 + EU24 User's Guide
40DHB0002UKEG – Issue 4 (9th February 2004)
Function Keys
key to park
symbol appears next to the
Admin key.