Table of Contents
Advertisement
5.13 Chart view
The chart application defaults to system view which means the fol-
lowing settings apply to all nav stations in your system:
•
Chart mode and orientation
•
Chart layers (aerial, radar, 3D locator and AIS)
•
Synchronization (radar/chart and 3D/chart)
•
Show/hide waypoints, routes and tracks
•
Declutter
•
Vectors
If you change any of these options in one window, ALL system win-
dows will update.
When local chart view is selected the presentation for each window
is set independently.
To define how the chart windows are presented
1. Toggle between LOCAL and SYSTEM on the CHART VIEW
softkey.
G-Series Reference Manual
5.14 Chart detail
You can adjust the level of detail shown on the chart by choosing to
show or hide certain features.
To show or hide routes and tracks
1. Highlight a route or track and press the HIDE softkey.
0 Vessel offset
or
1. Open the Route or Track list.
1/3 Vessel offset
2. Highlight a route or track in the list.
2/3 Vessel offset
3. Toggle between SHOW and HIDE settings with the ROUTE ON
CHART or TRACK ON CHART softkey.
Note: The active route is always displayed irrespective of the
display status.
Decluttering the chart view
Sometimes a large number of cartographic objects in a particular
area can render the chart view difficult to read. You can reduce the
amount of detail by de-cluttering the chart display. Turning declutter
on hides the following cartographic objects:
•
Text
•
Chart boundaries
•
Spot soundings
•
Depth contours
•
Light sectors
•
Caution and routing data
•
Land and marine features
•
Business services (if available on your cartography)
To turn declutter on or off
1. Press the PRESENTATION softkey.
2. Toggle between ON and OFF with the DECLUTTER softkey.
68
Hide quick links:
Advertisement
Table of Contents
