Raymarine GPM400 Reference Manual page 42

To open the waypoint group list
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
3. Press the WAYPOINT GROUPS softkey.
You can now:
• Make a new group
• Move waypoints between groups
• Rename groups
• Delete groups
To make a new waypoint group
1. Open the waypoint group list.
2. Press the MAKE NEW GROUP softkey.
3. If you want to give the group a name other than the default,
press EDIT GROUP NAME and set the name.
4. Press OK.
To move waypoints between groups
1. Open the waypoint group list.
2. Press the MOVE BETWEEN GROUPS softkey.
3. Press SELECT GROUP A and select the group to move the
waypoint from.
4. Press SELECT GROUP B and select the group to move the
waypoint to.
5. Highlight the waypoint you want to move.
6. Press MOVE WAYPOINT FROM A TO B.
7. Press OK when done.
To rename a group
1. Open the waypoint group list.
2. Highlight the group you want to rename.
3. Press the RENAME GROUP softkey.
4. Press the EDIT GROUP NAME softkey.
5. Enter the new name.
6. Press OK.
G-Series Reference Manual
Deleting groups
When you erase a group, the group name and all the associated
waypoints are removed from the system. If a group contains one or
more waypoints that you want to keep, move those waypoints out
of the group before you delete it.
You can erase any waypoint group, with the following exceptions:
• You cannot erase the "My Waypoints" group.
• You cannot erase a group containing an active waypoint.
• You cannot erase a group containing waypoints that are part of
a stored route.
To delete a group
1. Open the waypoint group list.
2. Select the group you want to delete.
3. Press the ERASE GROUP softkey.
4. Confirm the deletion.
42