Raymarine GPM400 Reference Manual page 54

• Undo the last waypoint (chart view only).
• Delete a waypoint from the route list (waypoint list only).
• Abandon the route build.
To remove waypoints from a route in chart view
1. Highlight the waypoint you want to remove from your route.
2. Press the UNDO WAYPOINT softkey.
The waypoint and the route to it are removed from the screen and
the cursor moves back to the previous waypoint.
To remove waypoints from a route in waypoint list view
1. Highlight the waypoint you want to remove from a route.
2. Press REMOVE WAYPOINT.
To abandon the route build completely
1. In chart view or in waypoint list view, press CANCEL.
2. Confirm by pressing YES.
Saving your route
Once you have built your route, you can:
• Save and immediately follow the built route.
• Save the route for later use (and rename it if required).
A route that is saved and immediately followed is referred to as a
Quick Route. If a Quick Route already exists, it is overwritten
unless you rename it (see page 58).
To save a route
1. Press the SAVE ROUTE softkey.
2. To assign the route a name and color, press the appropriate
softkey; press OK to accept the defaults.
G-Series Reference Manual 54