Raymarine GPM400 Reference Manual page 24

2. Change the setting:
Cartography Setup Menu
Chart Display
Chart Grid
Chart Text
Chart Boundary
Spot Soundings
Safety Contour
Depth Contour
Nav. Marks
Highlight or change value
to new setting, using:
Trackpad
(up/down)
or
Rotary
control
3. Press OK to accept your changes, or CANCEL to go back to
the previous screen.
Dialog boxes
Dialog boxes are where you edit or enter data into the system.
They appear automatically at appropriate points. For example,
when you edit a list of waypoints, a dialog box appears for you to
enter or change waypoint names.
G-Series Reference Manual
Detailed
On
On
ON
ON
OFF
66ft
7ft
ALL
10ft
ON
16ft
20ft
33ft
66ft
To enter data into a dialog box
1. Select the appropriate field.
e.g.
Symbol
Name Waypoint 1
My Waypoints
Group
Comment
Highlight field to be edited
e.g. waypoint
2. Enter the data. Press OK to save the changes.
e.g.
Symbol
Name Waypoint 1
My Waypoints
Group
Comment
To change character or selection, use:
,
To move to next character for editing, use:
or
3. Repeat Steps 1 and 2 if necessary.
You can enter character text in upper- or lower-case but the system
is not case sensitive: it considers 'WAYPOINT 1' to be the same as
'Waypoint 1'.
To use special or accented characters, turn on the Extended Char-
acter Set in the System Setup Menu (see
24
EDIT NAME
OK
page 192).