Raymarine GPM400 Reference Manual page 58

You can edit a route in a variety of ways. You can:
• Change the course of a route.
• Change the name of a route.
• Change the color of a route.
• Erase a route.
To select the route to edit
1. Highlight the route on the chart display using the cursor.
2. Press the REVIEW AND EDIT THIS ROUTE softkey.
or
1. Open the Routes List by pressing ROUTES followed by the
REVIEW AND EDIT ROUTES softkey.
Editing active routes
An active route is one that the system is currently following.
All parts of an active route can be edited, except for the current tar-
get waypoint. If a waypoint becomes active (becomes the waypoint
you are navigating to) while you are editing it, the system cancels
the edit and the waypoint's details remain as originally set.
Adding waypoints
You can add existing waypoints to the route, or set up new way-
points and add them to the route.
To add an existing waypoint to the route
1. Press the AMEND ROUTE COURSE softkey.
2. Press the USE WAYPOINT LIST softkey.
3. In the right-hand column, highlight the position for the added
waypoint.
4. In the left-hand column, highlight the waypoint you want to add
to the list.
5. Press the INSERT WAYPOINT softkey.
6. Press the SAVE ROUTE softkey.
G-Series Reference Manual
To create and add a new waypoint
1. Highlight the route you want to add a waypoint to.
2. Press the INSERT WAYPOINT softkey.
3. Move the cursor to the position of the new waypoint.
4. Press PLACE WAYPOINT.
Moving waypoints
When you move a waypoint, its new position is updated in all routes
that use it.
To move a waypoint
1. Highlight the waypoint you want to move.
2. Press the MOVE WAYPOINT softkey.
3. Drag the waypoint to its new position.
4. Press OK.
Removing waypoints
You can remove a waypoint from a route, as long as it is not part of
another route. If you try to remove a waypoint that is used in
another route, the system will warn you that it cannot be removed.
To remove a waypoint
1. Highlight the waypoint you want to remove.
2. Press the REMOVE WAYPOINT softkey.
Changing a route's name or color
If you have many routes stored in your system, it can be useful to
give them individual names or mark them with a color of your
choice.
If the route was saved by the G-Series system with the name Quick
Route, changing its name will prevent it being overwritten by your
next quick route.
58