Dialogue M2A1 User Manual page 38

Note
Recover System from Hard Disk H
1 Restart system.
2 When the message "Press F9 for
Acronis Startup Recovery Manag
shows on screen, press F9 key to
proceed. An "Acronis True Image"
window will display. Click Restore.
3 A "Confirmation" querying window
appears. Press Yes button to procee
4 Once recovery completes, a
"Congratulations!" shows up
Exit button to quit Acronis recovery utility.
5 Restart your computer and go through Windows initial setup.
Recover System from Recovery DVD (Optional)
To recover system from recovery DVD, you need an external DVD ROM with USB
connector that runs on external power. To carry out system recovery:
1. Connect both your computer and DVD ROM to external power and connect the DVD
ROM to your computer.
2. Power on your computer. Open the DVD ROM and insert the recovery DVD.
3. Press F2 key when booting logo appears on screen to enter BIOS Setup utility.
Configure DVD ROM drive as the top priority for "Boot Device".
4. System will restart with the support of DVD ROM.
5. Once system restarts, an "Acronis True Image" window will display.
6. Follow steps 3 to 5 in previous section Recovering System from Hard Disk Hidden
Partition to finish recovery.
If your hard disk drive is damaged already, you won't be
able to recover your system by its hidden partition.
If the hard disk drive is still readable, be sure to back up
your computer files before recovery.
Make sure your computer is running on external power
whether before or during the system recovery, so that
system recovery won't fail due to power outage, which
further leads to the difficulty in booting up your computer.
idden Partition
er"
d.
. Press
- 37 -