Dialogue M2A1 User Manual page 32

The Setup
Main Menu
System Time
System Date
IDE Channel 0 Master
IDE channel 0 Slave
QuickBoot Mode
Summary screen
System Memory
Extended Memory
Sets system time, fields in [hh:mm:ss]
Sets system date, fields in [mm/dd/yyyy]
Displays the information of the primary IDE device that
connects to computer's Serial-ATA connector. System will
generate the information of such device itself. Press Enter
key to enter the sub-menu. The type of this primary IDE
device is set to [Auto] by default.
Displays the information of the secondary IDE device that
connects to computer's Serial-ATA connector. System will
generate such information itself. Press Enter key to enter
the sub-menu. The type of this secondary IDE device is set
to [Auto] by default.
Selects the boot mode for your computer. It is set to
[Enabled] by default.
Selects if to display hardware information at boot. It is set to
[Disabled] by default.
Displays the data storage capacity of the RAM integrated
on the motherboard of your computer.
Displays the data storage capacity of the extended
memory.
- 31 -