Use Usb Devices; Use Web Camera - Dialogue M2A1 User Manual

Use USB Devices

There are three Universal Serial Bus (USB)
connectors on your computer. You can
connect USB devices such as mouse,
keyboards, or printer to either connector.
Connect
1. Plug your USB device to one of the USB connectors on your computer.
2. System will detect the device you just connect. If system is able to install a driver
automatically, you'll be notified that the device is ready to use. Otherwise, system will
prompt you to insert a disc containing the driver for the device.
3. For some devices, once it is ready to use, its hardware icon appears in the notification
area.
Disconnect
1. Most USB devices can be removed and unplugged at will. However, before unplugging
storage devices, such as USB flash drives, make sure your computer has finished
saving to the device.
2. Right-click on the Safely Remove Hardware icon in the notification area to disconnect
the USB device.
3. Unplug the USB device from your computer.
Note:

Use Web Camera

Your computer has a built-in web camera of 0.3 mega pixel. Make use of it in conjunction
with a video application program.
1. Press Fn + F12 or use Control Center to enable web camera.
When plugging USB devices, note the following:
1. Make sure the USB icon on the connector is facing
upwards. Connecting a USB cable incorrectly can
damage the connector on your computer.
2. Be sure to remove the hardware on your system before
unplugging the USB device, so as not to damage your
USB device or the files stored therein.
- 25 -