Use Display - Dialogue M2A1 User Manual

Use Display

Your computer is provided with a wide-view color TFT LCD for display. Video output is also
available through the D-SUB connector, by which you can connect an external monitor or
projector to your computer.
Adjust Brightness
Press Fn+F2 to decrease brightness. Press Fn+F3 to increase brightness. Brightness is
also adjustable through Control Center.
Configure Display
Click on the icon in the notification area to open the
display setting utility.
Follow the onscreen instructions to make the settings
Click to enable/disable wireless local area networking
module (WiFi). (Click the button to turn on/off the
module. When the blue dot besides lights, the module
is turned on.)
Click to enable/disable Bluetooth module.
(Click the button to turn on/off the module. When the
blue dot besides lights, the module is turned on.)
Click to show/hide the right/right panels.
Click to disable all wireless communications devices.
(Click the button to turn on/off the module. When the
blue dot besides lights, the module is turned on.)
Note: The main power supply to all wireless
modules must be switched on.
Turns the volume on and off.
(Click on this icon to mutes/enable volume.)
Adjusts volume. (Click
to decrease volume.)
Displays brightness. (Click
brightness. Click
brightness.)
GPS. (Click the button to turn on/off the module. When
the green light is on, the module is turned on.)
Web Cam. (Click the button to turn on/off the module.
When the green light is on, the module is turned on.)
Suspend Mode. (Click the button to put your computer
into suspend mode.)
Hibernation Mode. (Click the button to put your
computer into hibernation mode.)
- 20 -
to increase volume. Click
to increase backlight
to decrease backlight