Table of Contents
Advertisement
To make Bluetooth connection:
Enable Bluetooth Module
1.
Press Fn+F11 or the Bluetooth button in
Control Center to enable Bluetooth module.
(When the module is enabled, the blue dot
lights on.)
2.
Once the module is enabled, the
Bluetooth icon
area turns to blue and a message
"Bluetooth hardware found." shows above it.
3.
Right-click on the Bluetooth icon in the notification area and select Display Classic
View. The Bluetooth utility IVT BlueSoleil opens.
Connect & Access Services
1.
Power on the Bluetooth device
you are going to use.
2.
In IVT BlueSoleil window, click
Bluetooth in the menu bar.
Select Search Devices from
the menu. The icon of the
Bluetooth device that you are
going to use will show up in
blue color indicating idle status.
3.
Right-click on the icon of the
device either among My
Devices or My Services icons
and select Connect Bluetooth Human Interface Device from the menu to trigger the
connection.
4.
Once the device/service is connected, its icon turns to green indicating connected
status.
5.
If accessing that device/service requires a password, you will be asked to provide it.
Disconnect
You can break the connection anytime. However if you force the disconnection during file
transmission, files may be lost. To break Bluetooth connection:
1. Open up IVT BlueSoleil window.
2. Right-click on the icon of the device that you are going to disconnect either among My
Devices or My Services icons and select Unplug from the menu.
in the notification
- 24 -
Advertisement
Table of Contents
