Table of Contents
Advertisement
Exit Menu
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
System Recovery
In the event that your operating system gets damaged or you wish to restore your system
back to the factory default state, you only need to carry out system recovery without
reinstalling the operating system.
Warning! If your computer is a version built-in with VIA processor, Nano
System recovery can be carried out, either
1.
through the hidden partition of hard disk (if it still functions well); or
2.
from the recovery DVD, which is an optional item.
Exit BIOS Setup and save changes to CMOS.
Exit BIOS Setup without saving changes to CMOS.
Load default values for all setup items.
Load previous values from CMOS for all setup items.
Save changes to CMOS.
or C7 series, you have to enable Linux IDE Patch under the
Advanced menu of BIOS Setup Utility before recovery and
disable it back after recovery. Because Microsoft Windows
operation system would be unstable if Linux IDE Patch is set
enabled. To enable/disable Linux IDE Patch, see
Advance
>
The Setup
to make change to Linux IDE Patch setting.
>
Advanced
- 36 -
Chapter 5:
on page 32 to know how
Advertisement
Table of Contents
