Status Leds - NETGEAR GS908E User Manual

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E

Status LEDs

Status LEDs are located on the front panel and back panel of the switch.
Figure 2. Power LED on the front panel
Figure 3. Port LEDs on the back panel
Table 1. LED descriptions
LED
Power LED
Port LEDs (1 through 8)
Description
Off. No power is supplied to the switch or the switch functions in Quiet mode with its Power LED
disabled (see Control the LEDs
Solid blue. Power is supplied to the switch and the switch is ready for operation.
Solid amber. An event or a problem occurred (see
or Problems on page 69).
Off. No link with a powered-on device is detected or the active ports function in Quiet mode with
their port LEDs disabled (see
Solid green. A 1000M link with a powered-on device is detected.
Blinking green. Traffic is detected on the 1000M link.
Solid yellow. A 10M or 100M link with a powered-on device is detected.
Blinking yellow. Traffic is detected on the 10M or 100M link.
Hardware Overview of the Switch
on page 64).
Manage Auto-Diagnostics and Clear Events
Control the LEDs on page 64).
8