Table of Contents
Advertisement
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
To apply the Standard Preset mode:
1.
Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2.
Enter the IP address that is assigned to the switch.
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select ADVANCED SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Select STANDARD PRESET (DEFAULT).
The PREVIEW section shows the settings for the Standard Preset mode.
6.
Click the APPLY button.
Your settings are saved.
Rename a Custom Preset Mode
After you save a custom preset mode, you can rename the mode.
To rename a custom preset mode:
1.
Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2.
Enter the IP address that is assigned to the switch.
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select ADVANCED SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5.
Click the SAVE tab.
6.
Select the Slot 1 or 2 button.
7.
In the Preset Mode Name field, enter a new name from 1 to 16 characters for the custom preset mode.
8.
Click the RENAME button.
Your settings are saved.
Optimize the Switch Performance
30
Hide quick links:
Advertisement
Table of Contents
