Status Leds - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM

Status LEDs

Status LEDs are located on the front panel of the switch. Each port and slot provides a left LED and a right
LED that, in combination, indicate speed and activity.
Table 2. LED descriptions
LED
Power LED
Fan LED
Model XS512EM: Ethernet
Port LEDs for ports 1 through
10 and combo ports 11T and
12T
Model XS724EM: Ethernet
Port LEDs for ports 1 through
22 and combo ports 23T and
24T
Model XS512EM: SFP+ slot
LEDs for ports 11F and 12F
Model XS724EM: SFP+ slot
LEDs for ports 23F and 24F
Left Right Description
LED LED
N/A (single LED Off. No power is supplied to the switch.
only)
Solid green. Power is supplied to the switch and the switch is
ready for operation.
N/A (single LED Off. The fan is operating normally.
only)
Solid yellow. A fan failure occurred.
Green Green Both LEDs solid green. A 10G link with a powered-on device
is detected.
Both LEDs blinking green. Traffic is detected on the 10G link.
Green Off Left LED solid green, right LED off. A 5G link with a
powered-on device is detected.
Left LED blinking green, right LED off. Traffic is detected on
the 5G link.
Off Green Left LED off, right LED solid green. A 2.5G link with a
powered-on device is detected.
Left LED off, right LED blinking green. Traffic is detected on
the 2.5G link.
Yellow Yellow Both LEDs solid yellow. A 1G or 100M link with a powered-on
device is detected.
Both LEDs blinking yellow. Traffic is detected on the 1G or
100M link.
Off Off No link with a powered-on device is detected.
Green Green Both LEDs solid green. A 10G link with a powered-on device
is detected.
Both LEDs blinking green. Traffic is detected on the 10G link.
Yellow Yellow Both LEDs solid yellow. A 1G link with a powered-on device
is detected.
Both LEDs blinking yellow. Traffic is detected on the 1G link.
Off Off No link with a powered-on device is detected.
Hardware Overview of the Switch
8