Table of Contents
Advertisement
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
To activate the 802.1Q-based VLAN mode:
1.
Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2.
Enter the IP address that is assigned to the switch.
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SWITCHING.
The Quality of Service (QoS) page displays.
5.
From the menu on the left, select VLAN.
The VLAN page displays.
6.
In the 802.1Q-based VLAN (Advanced Mode) section, click the ACTIVATE button.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7.
Click the CONTINUE button.
Your settings are saved and the pop-up window closes. By default, VLAN 1 is added.
Create an 802.1Q-Based VLAN
An 802.1Q-based VLAN configuration lets you assign ports on the switch as tagged or untagged members
to a VLAN with an ID number in the range of 1–4094. By default, all ports are untagged members of VLAN 1.
To create an 802.1Q-based VLAN:
1.
Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2.
Enter the IP address that is assigned to the switch.
The login page displays.
3.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4.
From the menu at the top of the page, select SWITCHING.
The Quality of Service (QoS) page displays.
5.
From the menu on the left, select VLAN.
The VLAN page displays.
If you did not yet activate the 802.1Q-based VLAN mode, see
on page 40.
6.
In the 802.1Q-based VLAN section, click the ADD VLAN button.
Use VLANS for Traffic Segmentation
41
Activate the 802.1Q-Based VLAN Mode
Hide quick links:
Advertisement
Table of Contents
