Table of Contents
Advertisement
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
12.
Restore your computer to its original IP address.
13.
Verify that you can connect to the switch with its new IP address:
a.
Open a web browser from a computer that is connected to the same network as the switch.
b.
Enter the new IP address that you assigned to the switch.
The login page displays.
c.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
Use the NETGEAR Insight App to Access the Switch
The NETGEAR Insight app lets you discover the switch in your network and access the local browser
interface of the switch from your smartphone.
To access the switch from the Insight app:
1.
On your iOS or Android mobile device, go to the app store, search for NETGEAR Insight, and download
and install the app.
2.
If the switch is directly connected to a WiFi router or access point, connect your mobile device to the
WiFi network of the router or access point.
3.
Select LOG IN to log in to your existing NETGEAR account or tap the CREATE NETGEAR ACCOUNT
button to create a new account.
4.
After you log in to your account, name your network and specify a device admin password that applies
to all devices that you add to this network, and tap the NEXT button.
5.
You can now add a device. Choose one of the following options:
•
Add a device by scanning your network.
•
Add a device by entering its serial number.
•
Add a device by scanning its barcode.
Note
Pages might display and suggest that you connect the switch to power and to an
uplink. If you already did this, on these pages, tap the NEXT button.
6.
If the switch is not yet connected to the same WiFi network as your mobile device, connect it now to the
same WiFi network, wait two minutes, and then tap the NEXT button.
The switch is discovered and registered on the network.
7.
In the Insight app, select the switch and tap the Visit Web Interface link.
The login page of the local browser interface opens.
8.
Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
Install and Access the Switch in Your Network
18
Hide quick links:
Advertisement
Table of Contents
