Deactivate The Port-Based Or 802.1Q-Based Vlan Mode And Delete All Vlans - NETGEAR GS908E User Manual

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
9. To change an existing OUI, do the following:
a. Click the down arrow next to the OUI that you want to change.
b. Click the EDIT button.
c. Change the OUI, description, or both.
d. Click the SAVE button.
Your settings are saved.
10. To delete an OUI that you no longer need, do the following:
a. Click the down arrow next to the OUI that you want to delete.
b. Click the DELETE button.
Your settings are saved and the OUI is deleted.
11. Click the BACK button.
The VLAN page displays.
Deactivate the Port-Based or 802.1Q-Based VLAN Mode
and Delete All VLANs
If you activated the port-based VLAN mode or the 802.1Q-based VLAN mode, you can deactivate either
VLAN mode and delete all VLANs.
To deactivate the port-based VLAN mode or 802.1Q-based VLAN mode and delete all VLANs:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The Quality of Service (QoS) page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
6. In the No VLANs section, click the ACTIVATE button.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the CONTINUE button.
Your settings are saved and the pop-up window closes.
Use VLANS for Traffic Segmentation
47