Curtis D1000GT12A000 User Manual page 12

PROGRAMMING GUIDE
Curtis
Entering
Programming mode
Enter Code
- - - -
<Program Menus>
Select
Brew by Volume
Select
Brew by Time
Select
Temperature
Select
Energy Save Mode
Select
Brew Count Odom.
Select
WC-785/WC-789, PROGRAMMING GUIDE
To enter programming mode:
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button. Continue to
hold down BREW button until
Enter Code appears.
Enter 4 digit code.
(factory default = 1-2-3-4)
Pre-Infusion
Select
Brew Count Total
Select
Cold Brew Lock
Select
Master Reset
Select
Service Call
Select
IMPORTANT:
All programming functions are performed with the
three center buttons.
The symbols below the buttons are:
Scroll UP (1)
SELECT or ENTER to save new parameter (2)
Scroll DOWN (3)
Once you enter programming mode, press
through the various functions/features. Press
to the function/feature displayed. Then press
the various available settings. See Programming Options for detailed
descriptions.
Access Code
Select
Banner Name
Select
P-Maintenance
Select
Beeper On/Off
Select
PulseBrew On/Off
Select
or to scroll UP or DOWN
(Select) to make changes
or to scroll through
PG8
Displ. Brew Time
Select
Drip-Out Mode
Select
Display Messages
Select
Model Select
Select
Exit
Select
050217NC