Wan Settings - Planet WAP-200N User Manual

• Ending IP Address
• WINS Server IP
• Accept
• Cancel

5.4.2 WAN Settings

Go to the "Operation Mode" page to configure the device as "Client Router" and then go to "Router  WAN
Settings" to configure the device's WAN settings in client router mode. The WAN settings should be provided by
the ISP.
The page includes the following common settings in each Internet Connection Type:
Object
• Internet Connection Type
Specify the ending IP address for the DHCP range.
Enter the IP address of the WINS server.
Click Accept to apply the setting.
Click Cancel to cancel the setting.
Figure 5-23 WAN Settings – All
Description
• DHCP: Dynamic IP addressing assigns a different IP address each
time a device connects to an ISP service provider.
• Static IP: Setting a static IP address allows an administrator to set a
specific IP address for the router and guarantees that it cannot be
-59-
User Manual of WAP-200N/WBS-200N