Attention should be paid to the following hints:
1) The encryption method must be the same at both sites if configured.
2) Both sites should be Line-of-Sight.
3) Included in the package are two 5dBi antennas for the WAP-200N only for long distance
over 1km. Please connect to the 2.4GHz antennas with higher gain.
4)
For PtP connection over 1km, please adjust "Distance" setting to the actual distance between both
sites on the 'both sites' setting page.
5)
To adjust "Transmit Power", please:
(a) Go to the "Operation Mode" page to disable the "Green" option.
(b) Go to the "Wireless Advanced Settings-> Transmit Power" to manually adjust the transmit power.
User Manual of WAP-200N/WBS-200N
-116-